Heatmiser PRTHW-TS, Руководство по эксплуатации

Страница: 29 / 40

To perform a factory reset, follow these steps:
Turn off the thermostat by pressing and holding the off
button. Press and hold the bottom left corner of the LCD for
10 seconds. You will see all the icons appear for 2 seconds
and then disappear. You now need to power down the
thermostat for 5 seconds and then power on again.
THE FOLLOWING SETTINGS ARE OPTIONAL AND
IN MOST CASES NEED NOT BE ADJUSTED
Optional Features Explained
Feature 01 – Temperature Format: This function allows
you to select between °C or °F.
Feature 02 - Switching Differential: This function allows
you to increase the switching differential of the thermostat.
The default is 1°C which means the thermostat will switch
the heating on 1°C below the set temperature and will turn
it off when the set temperature is achieved. With a 2°C
differential, the heating will switch on 2°C below the set
temperature and will switch off when the set temperature is
achieved.
27