Heatmiser PRTHW-TS, Руководство по эксплуатации

Страница: 26 / 40

You will then see the hotwater status change and the
hotwater output indication will flash to show it has been
overridden from the programmed setting. The hotwater will
remain in the override state until the next programmed time.
To cancel, repeat the steps above.
Locking the Keypad
The thermostat has a keylock facility. To enable this press
the bottom right corner of the display and hold for 10
seconds.
When activated, you will see .
To cancel, repeat the steps above.
Temperature Override
Using the keys allows you to adjust the set
temperature. When you press either of these keys, you will
see the word SET and the desired temperature. Press Done
to accept.
Note: You should note that this new temperature is
maintained only until the next programmed comfort level. At
this time, the thermostat will revert back to the programmed
levels.
24