Heatmiser PRTHW-TS, Руководство по эксплуатации

Страница: 14 / 40

Pairing the thermostat with the UH1-W
On the UH1-W:
Set the board id number on the UH1-W by selecting from
01-09 indicated on the rotary switch. Each UH1-W on the
system will need a different id number.
On the PRT-TS WiFi RF:
• Press Prog then Setup.
• At the top of the screen press the Up button to select
feature 06.
• Use the up/down buttons in the centre of the screen & set
the large number to 00, this configures the thermostat to
communicate with the UH1-W.
• Press the UP button at the top of the screen to select
feature 07.
• Use the up/down buttons in the centre of the screen
to select the UH1-W board id number you are
communicating with. (01-09)
• Press the up button at the top of the screen to select
feature 08.
12