Heatmiser PRT-WTS, Руководство пользователя

Страница: 14 / 19

Feature 04 – Output Delay: To prevent rapid switching, an output
delay can be entered. This can be set from 00-15 minutes. The
default is 00 which means there is no delay.
Feature 05 – Pairing Function: Allows the thermostat to be paired
with the receiver.
Feature 06 - Fail Safe
If enabled, the thermostat will send a signal to the receiver every 20
minutes. Should the receiver fail to receive the signal from the
thermostat, the receiver will activate the output for 20% of the time.
This is to protect the system against a loss of wireless signal or should
the thermostat battery fail whilst you are away.
Feature 07 – Optimum Start: Optimum start will bring the heating
on early if needed, so the house is warm when you wake up. This
means you don’t need to allow any extra heat up time when
programming the comfort levels. The thermostat will automatically
learn the required heat up time and will adjust itself, if required,
throughout the year. 13