Heatmiser PRT-WTS, Руководство пользователя

Страница: 4 / 19

Pairing the Thermostat
To pair the thermostat with the receiver, follow these steps;
On the receiver;

Press the Pair button.

The Communication LED will come on
On the thermostat;

Press Prog and then Setup

At the top of the LCD, you will see 01.
Use the up arrow to select 05 to enter the pairing function

Press Zone 1 or Zone 2 to select the relevant zone.
(Two PRT-WTS can work with a single receiver, offering a two zone system)

In the centre of the LCD, you will see 01. This is the channel
address. The default setting of 01 can be used in most cases, but
should be changed when a conflict is detected between other RF
devices.

Use the Up/Down keys to enter the address

Press Setup to Pair the thermostat.
3