Heatmiser PRT-WTS, Руководство пользователя

Страница: 5 / 19

Note: You need to finish pairing the thermostat before the
receiver pair LED goes out.
Pair Successful
The Comms LED on the receiver should flash and then go out to
indicate the pair is successful. The thermostat will then display the
communication icon.
Pair Fail
If the Comms LED does not flash there is a problem with the RF
signal, and you should reduce the distance between the thermostat
and receiver and where possible check that no metal objects are
blocking the signal. The LED will automatically go out after 1 minute.
Temperature Display
Room Temp =
This is the current room temperature.
SET = This is the temperature you are trying to achieve in your home.
4