Heatmiser neoStat-hw V2, Инструкция по эксплуатации

Страница: 7 / 24

6
What is a Mesh Network
Approach Sensor
NeoStats work using a mesh network, meaning neoStats have the ability to send &
receive signals via other thermostats on the network. This signal is relayed from one
thermostat to another until it reaches its destination. This communication method
extends the communication range whilst offering increased network stability when
compared with standard RF thermostats.
The Mesh symbol is shown when the device is communicating with the neoHub, if the
mesh symbol disappears this indicates connection to the neoHub has been lost.
The neoStat-hw V2 uses proximity to detect when you are about to use the touch
keys. As you approach the neoStat-hw V2, the touch keys and backlight will light up.
This can be useful if you need to adjust the timer in a dark room.
• Press the Tick key once again to pair the neoStat to the neoHub .................
• The MESH symbol appears flashing on the display.
• When the neoStat-hw V2 successfully connects to the neoHub the
MESH symbol will be permanently displayed.
• Press ADD ANOTHER for addtional zones or press FINISH to complete setup.
Please note, you only have to pair the hub to your account once.
To pair any additional neoStats, select ZONES, edit, then ADD ZONE.