Heatmiser neoStat-hw V2, Инструкция по эксплуатации

Страница: 18 / 24

17
Series
Factory Reset
To reset the device to factory default settings, follow these steps:
• Use the Left / Right keys to scroll to .....................................................................
• Press and hold Tick to turn the display OFF ............................................................
• SETUP will be highlighted ..............................................................................................
• Press and hold the Tick key for 10 seconds .............................................................
• All of the icons on the display will appear for 2 seconds, then you
will see the number 1 or 2 flashing.
• Use the Left / Right keys to scroll between modes ...............................................
Mode 1 = Thermostat
Mode 2 = Time Clock
• Press the Tick key to confirm selection .....................................................................
The neoStat will revert to the main display screen for the selected mode.
Note: Factory reset will cancel all parameters that were entered during the set-up and
pairing operations. These processes must be repeated after factory reset is completed.