6
December 9, 2019
7059-801D
HEATILATOR ECO CHOICE PS50
C. Quick Start Guide
ECO-CHOICE QUICK START GUIDE
*Before you plug in this appliance, follow these instructions*
Once a fi re has been established in
the unit, leave the unit burning on the
“high” setting for 30 minutes to allow
the paint to cure.
Note: Odors and vapors will be
released during this process.
*Open windows in the room for ven-
tilation*
1
2
4
5
6
9
Remove hang tags from the door glass. Clean the glass. Remove the hardware pack and desiccant
bag from the fi rebox area before your fi rst fi re.
Add pellets to the hopper and close
the lid.
Open the fi rebox door and make sure
the baffl es are in place.
Close the fi rebox door and plug the
power cord into the wall receptacle.
Turn the thermostat on.
Turn the thermostat to off .
If the feed tube is empty or this is the
fi rst fi re, add a handful of pellets to
the fi repot.
*Do not add extra fuel to the fi repot
if the feed tube has already been
primed. Overfi lling the fi repot will
cause smoky start-ups.
If the fi re dies out after a few minutes
of operation it will be necessary to
push the reset button to add more
fuel.
3
7
The stove will feed pellets for a
minute and stop. Once a fi re starts,
the feed cycle will resume.
Note: Allow 5 minutes for
ignition to take place.
8
After 30 minutes have passed, turn the thermostat off and allow the unit to cool completely. Open the door and clean the fi repot
according to the cleaning instructions found inside the hopper lid or owners manual. Close the door and set the thermostat to a
desired temperature. Unit is now ready to resume normal operation.
10