background image

Heatilator • CST42A • 4012-012 Rev J • 08/06

47

E. Limited Warranty

HEATILATOR WOODBURNING FIREPLACE

Limited Warranty

As part of its

20-YEAR BUYER PROTECTION PROGRAM

AS PART OF ITS 20 YEAR BUYER PROTECTION PROGRAM (“PROGRAM”), HEARTH & HOME TECHNOLOGIES 
INC. (“HHT”)

 

is pleased to offer a Limited Warranty and a Replacement Parts Advantage covering speci

fi

 c components of your Heatilator

®

 

woodburning 

fi

 replace system ( the “Fireplace”), installed in the United States of America or Canada.  Dealers and employees of 

HHT

 have no 

authority to make any warranty or authorize any remedies in addition to or inconsistent with the terms of this Program

.  

Limited Warranty

HHT

 warrants the following components of your Heatilator woodburning 

fi

 replace to be free from original defects in material and workmanship 

during the applicable periods described: 

fi

 ve years for the 

fi

 rebox assembly, chimney system and roof termination; two years for refractory 

fi

 rebox 

liners; and one year for the grate, wire mesh screens, fan system, outside air system, and glass doors.  All limited warranty periods run from the 
date of initial installation of your Fireplace (the “Installation Date”).  The Limited Warranty is subject to the conditions, exclusions and limitations of 
liability listed below.   

Replacement Parts Advantage

Under 

HHT

’s Replacement Parts Advantage, for a period of twenty years from your Installation Date of your Fireplace, if available, 

HHT

 will provide 

you with repair or replacement parts for defective components which are no longer under their applicable Limited Warranty, at 50% of the then 
current retail list price for such components.  

HHT

 shall have no responsibility for freight and labor charges related to such parts.

Conditions, Exclusions, & Limitations of Liability

A. 

Both the Limited Warranty and Replacement Parts Advantage supplied by 

HHT

 apply only while the Fireplace is in its location of    original 

installation.  

HHT

’s obligation under this warranty does not extend to damages resulting from (1) installation, operation or maintenance of 

the Fireplace not in accordance with the Installation Instructions, Operating Instructions, and the Listing Agent Identi

fi

 cation Label furnished 

with the Appliance; (2) installation which does not comply with local building codes; (3) shipping, improper handling, improper operation, 
abuse, misuse, accident or unworkmanlike repairs; (4) environmental conditions, inadequate ventilation or drafting caused by tight sealing 
construction of the structure, air handling devices such as exhaust fans or forced air furnaces, or other causes;  (5) use of fuels other than 
those speci

fi

 ed in the Operating Instructions; (6) installation or use of components not supplied with the Fireplace or any other components 

not expressly authorized and approved by 

HHT

; and/or (7) modi

fi

 cation of the Fireplace not expressly authorized and approved by 

HHT

 in 

writing. This warranty is limited to only the component parts manufactured or supplied by 

HHT

.

B.

 During 

the 

fi

 rst year of the Limited Warranty, 

HHT

 will, at its sole option, repair or replace any covered defective component and will provide 

replacement parts at no charge. And will pay reasonable labor and freight costs.  During the second through the 

fi

 fth years of the Limited 

Warranty (if applicable), 

HHT

 will provide replacement parts free of charge for any covered defective component, but will not pay for freight 

or labor costs related to the shipment of the parts or the actual repair or replacement.  After the 

fi

 fth anniversary of the Installation date, 

HHT

’s sole obligation and your exclusive remedy is set forth in 

HHT

’s Replacement Parts Advantage described above.  

In no event shall 

HHT be liable for any incidental or consequential damages caused by defects in your Fireplace.

     

C.  EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE   WARRANTY 

SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE WARRANTY SPECIFIED 
ABOVE.

  

D. 

Some states do not allow exclusions or limitations of incidental or consequential damages, so those limitations may not apply to you. This 
warranty gives you speci

fi

 c rights; you may also have other rights which vary from state to state.  

How to Obtain Service

1. 

To obtain service under this warranty you must:

2. 

Send written notice of the claimed condition to Heatilator Technical Service Department, Hearth & Home Technologies, 1915 W. Saunders 
Street, Mt.. Pleasant, Iowa 52641-1563.  You may also register your claim online at www.heatilator.com.

3. 

Provide proof of purchase, model number, serial number, and manufacturing date code to 

HHT

.

4. 

Provide 

HHT

 reasonable opportunity to investigate the claim, including reasonable opportunity to inspect the Appliance prior to any repair or 

replacement work and before the Appliance or any component of the Appliance has been removed from the place of original installation.

5. 

Obtain 

HHT

’s consent to any warranty work before the work is done.

ADDITIONAL INFORMATION: 

If you would like information on current HEATILATOR products or want to locate a dealer in your area, call 

1-800-927-6841.

©

2003 Heatilator is a Registered Trademark of Hearth & Home Technologies Inc.

Содержание CST42A

















































Отзывы: