manualshive.com logo in svg

Heatilator CNXT4236IH CNXT4842IH, Руководство пользователя

Owner'S Manual для моделей Heatilator CNXT4236IH и CNXT4842IH доступен для бесплатного скачивания на manualshive.com. Этот manual предоставляет информацию по установке, использованию и уходу за вашим газовым камином Heatilator, гарантируя безопасность и эффективность его эксплуатации. Скачайте его прямо сейчас!

Поделиться
Скачать
background image

 

Heatilator • Caliber CNXT Series • 4047-132 Rev P • 11/07 

45

Shock Risk

•  Replace damaged wire with type 105° 

C rated wire.

•  Wire must have high temperature 

insulation.

WARNING

E. WSK-MLT Multifunction Wall Switch

The WSK-MLT multifunctional wall switch is designed to 
control 

fl

 ame height, blower speed and auxilary functions on 

your gas 

fi

 replace. For models equipped with the intelli

fi

 re 

system (*IPI), the cold climate function can control the pilot 

fl

 ame as well. The wall switch is equipped with thermostat 

functions which can automatically control the temperature 
in the room in which it is installed. An auxiliary function pro-
vides 110-120 VAC source for added features the 

fi

 replace 

may have installed. Electrical ratings for the control box are 
110 VAC, 60 Hz, and is required for operation of this de-
vice.

Precautions

This remote is tested and safe when installed in accordance-
with this installation manual. It is your responsibility to read 
all instructions before starting installation and to follow these 
instructions carefully during installation. Do not install any 
components that may be damaged. Do not modify, disas-
semble, or substitute any of the components included with 
this kit. Installation of this unit must be done by a quali

fi

 ed 

service technician. 

Placement of this wall switch may affect performance or ac-
curacy of the automatic (thermostat) control. An assessment 
of the space should be done prior to installation for optimal 
performance. See “Determine Location” for recommenda-
tions.

Determine Location

Determine the location for the wall switch. The chosen loca-
tion should provide an accessible location in the same space 
as the gas 

fi

 replace. Never place this unit in a separate 

room. The control wire supplied with this unit is 17 ft (5.2 m) 
in length. The distance from the 

fi

 replace to the switch may 

be lengthened provided that the wire used never exceeds 
50 ft, and that the distance from the 

fi

 replace to the switch 

never exceeds 30 ft.

The switch should be mounted into a listed electrical junc-
tion box. The junction box should be dedicated to this wall 
switch. Never install this wall switch into a junction box that 
is shared with other electrical service or devices. If possible, 
install this unit on an interior wall of the residence at a rec-
ommended height of 5 ft from the 

fl

 ooring. Should the switch 

be installed on an exterior wall, be certain wall insulation is 
kept intact and not damaged or dislodged during the instal-
lation of the electrical junction box. 

For exterior wall installations, it is recommended that the 
junction box be sealed with caulking material. This will mini-
mize heat loss through this location and improve the accu-
racy of the automatic (thermostat) operation.

All wiring should be done by a quali

fi

 ed electrician and shall 

be in compliance with local codes and with the 

National 

Electric Code ANSI/NFGA No. 70- current

 (in the United 

States), or with the current 

CSA C22.1 CANADIAN ELEC-

TRIC CODE

 (in Canada).

Note: 

The electrical junction box provided with the 

fi

 replace 

must be wired with 110 VAC before installing this kit. 

Содержание CNXT4236IH CNXT4842IH





























































































Отзывы:

Нет отзывов

Похожие инструкции для CNXT4236IH CNXT4842IH

Pacific energy G Series Installation And Operating Instructions Manual preview
G Series
Бренд: Pacific energy Страницы: 36
Pacific energy T5 Installation And Operating Instrictions preview
T5
Бренд: Pacific energy Страницы: 24
Home Decorators Collection 765477 Use And Care Manual preview
765477
Бренд: Home Decorators Collection Страницы: 19
Scott Living 320643178 Assembly Instructions Manual preview
320643178
Бренд: Scott Living Страницы: 72
Astria MontebelloSTTEN Installation And Operation Instructions Manual preview
MontebelloSTTEN
Бренд: Astria Страницы: 64
Muskoka 25-900-003 Use And Care Manual preview
25-900-003
Бренд: Muskoka Страницы: 36
Majestic MBU36 Installation Manual preview
MBU36
Бренд: Majestic Страницы: 20
Focus Slimfocus mural Specific Instructions preview
Slimfocus mural
Бренд: Focus Страницы: 8
Trimline 38 FS Installation Instructions Manual preview
38 FS
Бренд: Trimline Страницы: 22
Vermont Castings LHEACNSS Contour KT1B80 Installation Instructions preview
LHEACNSS Contour KT1B80
Бренд: Vermont Castings Страницы: 2
Celsi ELECTRIFLAME XD Mk2 B-1005344 Instructions Manual preview
ELECTRIFLAME XD Mk2 B-1005344
Бренд: Celsi Страницы: 12
Fire Sense 60353 Use And Care Manual preview
60353
Бренд: Fire Sense Страницы: 6
QualityCraft MW914T-35BK Manual preview
MW914T-35BK
Бренд: QualityCraft Страницы: 4
Nordpeis PN-SAL01-300 Installation Manual preview
PN-SAL01-300
Бренд: Nordpeis Страницы: 70
Signature Design by Ashley EF30-30A User Manual preview
EF30-30A
Бренд: Signature Design by Ashley Страницы: 39
UBERHAUS DESIGN WW11990 Operator'S Manual preview
WW11990
Бренд: UBERHAUS DESIGN Страницы: 9
hoxter ECKA 50/35/45 Instruction And Operating Manual For End Consumer preview
ECKA 50/35/45
Бренд: hoxter Страницы: 208
ROOMS TO GO 79710262 1026 Use And Care Instructions Manual preview
79710262 1026
Бренд: ROOMS TO GO Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды