13
Lighting Instructions
Lighting Instructions
Ignition Instructions
Check and ensure that an AA battery is inside the ignition
chamber and has power. Ensure the anode (+) faces outwards.
1 . Ensure that the control knob is OFF . Slowly open the gas cylinder valve .
2 . Press and turn the control knob to LIGHT position, push the igniter to generate spark
while keeping control knob in pressed position
3 . Check for pilot flame through glass tube. If pilot does not light, turn control knob
to OFF position wait two minutes minimum and try again from the start . Several
attempts may be necessary .
4 . If the pilot is lit, keep control knob pressed for 15
seconds then turn the control knob to LOW .
5 . For maximum heat turn control knob to ‘HIGH’ .
6 . To turn heater off, turn control knob to OFF .
7 . Close the valve of the gas cylinder or the regulator
after use .
To Turn Off The Heater
1 . Press and turn the control knob clockwise to OFF position .
2 . Turn the gas cylinder valve to OFF or closed and disconnect the cylinder .
Содержание 901565
Страница 7: ...7 Parts List Parts List...