9
Assembly Instructions
Assembly Instructions
Do not fully tighten fittings until assembly is complete
1 . Attach wheels to base cylinder of the
heater . Line up holes in wheel with
corresponding holes in base and insert
2pcs M8x16 screw (FF) through holes.
Ensure that wheels are parallel to the
base and hand tighten the screws .
Parts used:
F M8X16 2PCS
3. Insert 3pcs M8 bolts (CC) into holes on screen cover.
Attach 3pc M8 washers (DD) over the bolts, place the
reflector onto the bolts and attached 3pcs M8 washers
(DD) over bolts and onto reflector.
Secure with 3 pcs wing nuts (EE). Do not over tighten.
Parts used:
CC M8 Bolt 3PCS
DD M8 Washer 6PCS
EE M8 Wing nut 3PCS
2 . Attach 4pcs protection grills to the
holes on top of base cylinder using
8pcs M6 nuts (BB) to secure in
place .
Parts used:
BB M6 8PCS
Содержание 901565
Страница 7: ...7 Parts List Parts List...