manualshive.com logo in svg

Heat & Glo SL-550BE, Руководство пользователя

Owner'S Manual для Heat & Glo SL-550BE доступен для бесплатного скачивания на manualshive.com. Этот инновационный камин обогревает помещение и создает уютную атмосферу. Скачайте свой экземпляр руководства, чтобы насладиться всеми возможностями этого продукта.

Поделиться
Скачать
background image

Heat & Glo  •  SL-550BE, SL-550BE-IPI  •  2114-900 Rev. H  •  2/08

2

Congratulations

Listing Label Information/Location

Model Name: ___________________________________________ Date purchased/installed: __________________

Serial Number: __________________________________________ Location on appliance: ____________________

Dealership purchased from:  _______________________________ Dealer Phone:  __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

Congratulations on selecting a Heat & Glo gas appliance 
—an elegant and clean alternative to wood burning 
appliances. The Heat & Glo gas appliance you have 
selected is designed to provide the utmost in safety, 
reliability, and effi ciency.

As the owner of a new appliance, you’ll want to read and 
carefully follow all of the instructions contained in this 

Owner’s Manual

. Pay special attention to all Cautions and 

Warnings.

This

Owner’s Manual 

should be retained for future 

reference. We suggest that you keep it with your other 
important documents and product manuals.

The information contained in this 

Owner’s Manual

, unless 

noted otherwise, applies to all models and gas control 
systems.

Your new Heat & Glo gas appliance will give you years of 
durable use and trouble-free enjoyment. Welcome to the 
Heat & Glo family of appliance products!

Read this manual before installing or operating this appliance. 

Please retain this owner’s manual for future reference.

We recommend that you record the following pertinent 
information about your appliance.

Gas and Electric 
Information

Serial Number

Type of Gas

The model information regarding your specifi c appliance can be found on 
the rating plate usually located in the control area of the appliance.

Homeowner Reference Information

Heat & Glo, a  

 of Hearth & Ho me Te chnologies, Inc. 

20802 Kensington Boulevard, Lakeville, MN 5504 4

brand

Not for use with solid fuel.
(

Ne doit pas entre utilise avec un combustible solide).

This appliance must be installed in accordance with local codes, if any; if not, follow ANSI Z223.1 
in the  USA  or CAN/CGA B149 installation codes.

(Installer l’appareil selon les codes ou reglements

locaux ou, en l’absence de tels  reglements, selon les codes d’installation CAN/CGA-B149.)

Ty pe   of Gas

(Sorte De Gaz)

:

NATURAL GAS

MADE IN USA

Minimum Permissible Gas Supply for Purposes of Input Adjustment.

Approved Minimum

(De Gaz)

Acceptable

0.0 in w. c.

(Po. Col. d’eau)

Maximum Pressure

(Pression)

0.0 in w. c.

(Po. Col. d’eau)

Maximum Manifold Pressure

(Pression)

   0. 0 in w. c. 

(Po. Col. d’eau)

Minimum Manifold Pressure

(Pression)

   0. 0 in w. c. 

(Po. Col. d’eau)

Model:
(Modele):

Serial
(Serie):

ANSI Z21XX-XXXX · CSA 2.XX-MXX · UL307B

XXXXXXXX

IN CANADA

ALTITUDE:

0-0000 FT.

0000-0000FT.

MAX. INPUT BTUH:

00,000

00,000

MIN. INPUT BTUH:

00,000

00,000

ORIFICE SIZE:

#XXXXX

#XXXXX

XXXXXXXX 

To tal   Electrical Requirements: 000Vac, 00Hz., less than 00 Amperes

This product may be covered by one or more of the following patents: (Nos produits sont couverts par un ou plusieurs des brevets suivants): (United States)
4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495,
5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 594711 2, 5996575, 6006743, 6019099, 6048195,
6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2,
6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada)1297749, 2195264, 2225408; or other U.S. and foreign patents pending (ou
autres brevets americains et etrangers en attente).

Model Number

Содержание SL-550BE





































































Отзывы:

Нет отзывов

Похожие инструкции для SL-550BE

HAMPTON BAY Hudson Use And Care Manual preview
Hudson
Бренд: HAMPTON BAY Страницы: 10
Majestic 360DVS2 Homeowner'S Installation And Operating Manual preview
360DVS2
Бренд: Majestic Страницы: 44
Napoleon BGD90NT Operating Instructions Manual preview
BGD90NT
Бренд: Napoleon Страницы: 56
Nectre Fireplaces 15 LE Installation Instructions Manual preview
15 LE
Бренд: Nectre Fireplaces Страницы: 6
Napoleon EP 1402 Installation And Operating Instructions Manual preview
EP 1402
Бренд: Napoleon Страницы: 68
NANO NPC 280 Service Manual preview
NPC 280
Бренд: NANO Страницы: 52
Cannon CANTERBURY CANTIB-02-LP Installation Instructions Manual preview
CANTERBURY CANTIB-02-LP
Бренд: Cannon Страницы: 12
Napoleon Elevation EX36NTEL Installation Manual preview
Elevation EX36NTEL
Бренд: Napoleon Страницы: 128
Valor PORTRAIT 530 Installation Booklet preview
PORTRAIT 530
Бренд: Valor Страницы: 12
Gasmate GM142-110 Quick Start Manual preview
GM142-110
Бренд: Gasmate Страницы: 12
Mayer Barbecue HEIZA MFS-430 Assembly Instructions Manual preview
HEIZA MFS-430
Бренд: Mayer Barbecue Страницы: 8
Majestic 400DVKHL Installation And Operating Instructions Manual preview
400DVKHL
Бренд: Majestic Страницы: 64
Majestic Sovereign Series Owner'S Manual preview
Sovereign Series
Бренд: Majestic Страницы: 24
pleasant hearth Brunet FA092TB Quick Start Manual preview
Brunet FA092TB
Бренд: pleasant hearth Страницы: 2
Archgard AGDV-38 Installation And Operating Instructions Manual preview
AGDV-38
Бренд: Archgard Страницы: 26
Moda flame Naples GF301525BK Manual preview
Naples GF301525BK
Бренд: Moda flame Страницы: 7
Paramount Fitness EF-WM353 MO Owner'S Manual preview
EF-WM353 MO
Бренд: Paramount Fitness Страницы: 24
Hargrove AKRG5/8CPCLP Installation And Operation Manual preview
AKRG5/8CPCLP
Бренд: Hargrove Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды