manualshive.com logo in svg

Heat & Glo SL-550BE, Руководство пользователя

Owner'S Manual для Heat & Glo SL-550BE доступен для бесплатного скачивания на manualshive.com. Этот инновационный камин обогревает помещение и создает уютную атмосферу. Скачайте свой экземпляр руководства, чтобы насладиться всеми возможностями этого продукта.

Поделиться
Скачать
background image

71

Heat & Glo  •  SL-550BE, SL-550BE-IPI  •  2114-900 Rev. H  •  2/08

© 2007 Hearth & Home Technologies Inc.

LIMITED LIFETIME WARRANTY

HEAT & GLO GAS APPLIANCE PRODUCTS

060-981E   10/07

D.  Limited Lifetime Warranty

BASIC ONE-YEAR WARRANTY.  HEAT & GLO, a brand of HEARTH & HOME TECHNOLOGIES INC., located at 20802 Kensington Boulevard, 
Lakeville, MN 55044, (“HEAT & GLO”) warrants to the original owner that your new HEAT & GLO Gas Appliance (the “Product”) will be free 
from defects in materials and workmanship for a period of one year from the date of installation.  During the fi rst year, HEAT & GLO will replace 
or repair, at its discretion, any defective components at its sole cost and expense, including payment of all reasonable labor costs incurred in 
replacing or repairing such components. This basic warranty is subject to the conditions, exclusions and limitations described below.
EXTENDED LIFETIME COVERAGE.  HEAT & GLO warrants that the fi rebox, heat exchanger, log(s), and burner will not be defective in mate-
rial or workmanship during the period the Product is owned by the original owner, subject to the following conditions, exclusions and limitations 
described below.
CONDITIONS, EXCLUSIONS AND LIMITATIONS:
1.   This warranty applies to the original owner only and is nontransferable.
2.   This warranty applies only to Products installed in the United States of America or Canada.
3.   This warranty is limited to the replacement or repair of defective components or workmanship and HEAT & GLO may fully discharge all 

obligations under this warranty by repairing or replacing, at its discretion, the defective components. The maximum amount recoverable
under this warranty is limited to the purchase price of the Product and, if HEAT & GLO is unable to provide replacement or repair in an 
expedient and cost-effective manner, HEAT & GLO may discharge all obligations under this warranty by refunding the purchase price of 
the Product.  IN NO EVENT SHALL HEAT & GLO BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY 
DEFECTS IN THE PRODUCT. 

4.   Any labor and related repair charges relating to the costs and expenses of replacing or repairing defective components under the Limited 

Lifetime Warranty are not covered by this warranty, except as provided for under the Basic One-Year Warranty.

5.   Components and parts made by other manufacturers, whether sold with the Product or added thereafter, are NOT covered by this warranty 

unless expressly authorized and approved by HEAT & GLO in writing.

6.  Any damages caused by environmental conditions, inadequate ventilation or drafting caused by tight sealing construction of the structure, 

air handling devices such as exhaust fans or forced air furnaces, or other such causes are not covered by this warranty.

7.   This warranty will be void if:
 

a)  The Product is not installed, operated and maintained in compliance with local building codes and with the instructions in the Installer’s 

Guide, Owner’s Guide and Listing Agent Identifi cation Label furnished with the Product. 

 

b)   Any parts or components made by other manufacturers are added or used in the Product, unless expressly authorized and approved

by HEAT & GLO in writing.

 

c)   Any service work is performed on the Product by anyone other than an authorized HEAT & GLO representative.

 

d)   The Product is damaged due to shipping, improper handling, accident, abuse or misuse.

 

e)   Fuels other than those specifi ed in the Installer’s Guide and Owner’s Guide are used.

  f ) 

 

Modifi cation was made to the Product which was not expressly authorized and approved by HEAT & GLO in writing.

EXCEPT TO THE EXTENT PROVIDED BY LAW, HEAT & GLO MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY 
SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE WARRANTY SPECIFIED 
ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow exclusion or limitation of incidental or consequential 
damages, so those limitations may not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights which 
vary from State to State.
If warranty service is needed you should contact your installing dealer and if the installing dealer is unable to provide necessary parts or com-
ponents, contact the nearest authorized HEAT & GLO dealer or supplier.
NOTES TO CUSTOMER:

1.  In order to insure proper installation, operation and maintenance HEAT & GLO strongly recommends annual ser-

vicing by an authorized HEAT & GLO dealer.

2.  Please complete this information and retain this warranty in a safe place for future reference: Installation Date:______

 

Model #:_________________   Serial #:______________  Installing Contractor:_________________________

3.  HEAT & GLO reserves the right to make changes at any time, without notice, in design, material, specifi cations 

and prices of the Product. HEAT & GLO also reserves the right to discontinue styles and products.

Содержание SL-550BE





































































Отзывы:

Нет отзывов

Похожие инструкции для SL-550BE

Valor BR Installer'S Manual preview
BR
Бренд: Valor Страницы: 20
Kinder DAKOTA KF70 Installation And Maintenance Instructions Manual preview
DAKOTA KF70
Бренд: Kinder Страницы: 24
Sunjoy D-DN1377SAL-A Assembly Instruction Manual preview
D-DN1377SAL-A
Бренд: Sunjoy Страницы: 12
Uniflame WAD1081W-C Owner'S Manual preview
WAD1081W-C
Бренд: Uniflame Страницы: 12
barbas BOX 20 52 Installation And Maintenance Manual preview
BOX 20 52
Бренд: barbas Страницы: 36
HAMPTON BAY TIPTON OFW832S Use And Care Manual preview
TIPTON OFW832S
Бренд: HAMPTON BAY Страницы: 16
Stonegate FP10-27-11-50-OLOAKS Assembly And Operation Manual preview
FP10-27-11-50-OLOAKS
Бренд: Stonegate Страницы: 13
Empire Comfort Systems P)-5 Installation Instructions Manual preview
P)-5
Бренд: Empire Comfort Systems Страницы: 60
Empire Comfort Systems VFP32FB0F-5 Installation Instructions And Owner'S Manual preview
VFP32FB0F-5
Бренд: Empire Comfort Systems Страницы: 13
Olsberg HKI Leo 28/9251 Instructions Manual preview
HKI Leo 28/9251
Бренд: Olsberg Страницы: 37
Napoleon GD862KT Installation Instructions preview
GD862KT
Бренд: Napoleon Страницы: 2
Hearth and Home Technologies Simplifyre SFE-ST Installation & Operating Manual preview
Simplifyre SFE-ST
Бренд: Hearth and Home Technologies Страницы: 8
Dru Maestro 60/2 Tall RCH Installation Manual preview
Maestro 60/2 Tall RCH
Бренд: Dru Страницы: 68
Focus agorafocus 850 suspendu Specific Instructions preview
agorafocus 850 suspendu
Бренд: Focus Страницы: 7
HPC MLFPK 18-SQ Installation & Operation Instructions preview
MLFPK 18-SQ
Бренд: HPC Страницы: 10
Travis Industries 864 See Through GreenSmart 2 Owner'S Manual preview
864 See Through GreenSmart 2
Бренд: Travis Industries Страницы: 34
Travis Industries 430 Ember-Glo GSR2 Owner'S Manual preview
430 Ember-Glo GSR2
Бренд: Travis Industries Страницы: 74
Focus Slimfocus pivotant Specific Instructions preview
Slimfocus pivotant
Бренд: Focus Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды