HeartMath emWave, Руководство пользователя

Страница: 12 / 60

12
III. Your First Stress Relief Session with emWave
1. Power On: Setup Mode
Press the bottom of the Sensor Button. You do not need to hold the
button down, as a brief press will suffice. You will hear tones indicating
that your emWave is on. When the
emWave first powers up, a self-test is
performed. During this phase it will cycle
through the lights on the Heart Action
Strip, Coherence Level Indicator and Pulse
Indicator. When
emWave is turned on
and before it detects your pulse - roughly
15-30 seconds - it is in
Setup Mode .
While in Setup Mode, you can change the
Challenge Level and Display Brightness.
In Setup Mode two sets of blue lights appear on the Heart Action Strip.
The bars at the top of the Heart Action Strip indicate the Challenge
Level. The bars at the bottom indicate the Display Brightness.
Note: Setup Mode ends when emWave detects a pulse.
emwave owners manual v1.2.1 .indd 12 11/7/07 12:40:25 PM