Heartland STILLWATER, Инструкция по сборке

Страница: 41 / 72

39
24-3/8"
(62 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24-3/8"
(62 cm)
DIMENSIONS ARE TO CENTER OF RAFTERS.
DIMENSIONS ARE FROM OUTSIDE OF WALL PANELS.
24-3/8"
(62 cm)
24-3/8"
(62 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
DIMENSIONS ARE TO CENTER
OF RAFTERS.
DIMENSIONS ARE FROM OUTSIDE OF WALL PANELS.
PARTS REQUIRED:
RAFTER INSTALLATION
ALIGN OVER
STUDS
ALIGN OVER
STUDS
Maintain the measurements between rafters.
Maintain the measurements between rafters.
Align rafters over the wall studs.
1
FINISH
Your rafters are now installed.
BEGIN
Rafter with
ONE GUSSET
facing inward.
Rafter with
ONE GUSSET
facing inward.
3" (7,6 cm)
x6
10x14'
x2
x32
x4
10x10'
x2
x24
Flush to
outside
of panel
Flush to
outside
of panel
Flush to
outside
of panel
Flush to
outside
of panel
Rafter with
ONE GUSSET
facing inward.
Rafter with
ONE GUSSET
facing inward.
10' x 10'
10' x 14'
Two-Gusset
Preassembled
One-Gusset
Preassembled
Flush to inside
of panel
3"
(7,6 cm)
Screws angled
into top plate
Fig. A
Flush to inside
of panel
3"
(7,6 cm)
Screws angled
into top plate
Fig. A
(2) 3"
(7,6 cm)
Screws angled
in end rafter and
into doubler.
Fig. B
(2) 3" (7,6 cm)
Screws angled
in end rafter and
into doubler.
Fig. B
Check that you have the measurements shown.
Secure middle rafters with (2) 3" screws angled into doubler
(Fig. A) .
Secure (2) end rafters with (2) 3" screws into outside of each end rafter
(Fig. B)
.
Secure rafters on opposite side.