HearthStone 8410 Скачать руководство пользователя страница 5

Страница: 5 / 56

Hearthstone Quality Home Heating Products, Inc ®

WFP-75 Model 8410

1. SAFETY RULES FOR OPERATING YOUR FIREPLACE

• Use only a HearthStone glass door, specifically designed for the model WFP-75.
• When cleaning the fireplace, the ashes should be placed in a metal container with a tight

fitting lid. The closed container of ashes should be placed on a non-combustible floor

or on the ground outside the house, pending final disposal. If the ashes are disposed

of by burial in soil or otherwise locally dispersed, they should be retained in the closed

container until all cinders have thoroughly cooled.

• We recommend that our woodburning hearth products be installed and serviced by

professionals who are certified in the United States by NFI (National Fireplace Institute®)

or in Canada by WETT (Wood Energy Technology Transfer) or in Quebec by APC

(Association des Professionnels du Chauffage).

CAUTION: THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO

THE APPLIANCE ALWAYS OVERRIDES THE INFORMATION PUBLISHED,

IN ANY OTHER MEDIA (OWNER’S MANUAL, CATALOGUES, FLYERS,

MAGAZINES AND/OR WEB SITES).

CAUTION: NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE,

CHARCOAL LIGHTER FLUID OR SIMILAR LIQUIDS TO START OR

‘’FRESHEN UP’’ A FIRE IN THIS FIREPLACE. KEEP ALL SUCH LIQUIDS

WELL AWAY FROM THE FIREPLACE AT ALL TIMES.

CAUTION: KEEP COMBUSTIBLE MATERIALS AT LEAST 48 INCHES AWAY FROM THE

FRONT OF THE FIREPLACE OPENING.

CAUTION: NEVER LEAVE CHILDREN UNATTENDED WHEN THERE IS A FIRE

BURNING IN THE FIREPLACE.

CAUTION: NEVER USE A GRATE OR ELEVATE THE FIRE. BUILD WOOD FIRE

DIRECTLY ON HEARTH.

CAUTION: DO NOT USE A FIREPLACE INSERT AND OTHER PRODUCTS NOT

SPECIFIED FOR USE WITH THIS FIREPLACE.

CAUTION: DO NOT OBSTRUCT AIR INLETS. THIS FIREPLACE NEEDS AIR FOR ITS

SAFE OPERATION.

WARNING: THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED OR

VENTED GAS LOG SET. TO REDUCE RISK OF FIRE OR INJURY, DO NOT

INSTALL AN UNVENTED GAS LOG SET INTO THIS FIREPLACE.

WARNING: DO NOT USE MATERIALS OTHER THAN THOSE LISTED IN THE

REPLACEMENT PARTS SECTION DURING INSTALLATION AS THEY MAY

BE SAFETY HAZARDS AND A FIRE COULD RESULT.

Содержание 8410

























































Результаты поиска

Содержание 8410

Отзывы:

Похожие инструкции для 8410

Бренды по названию

Популярные бренды

HearthStone 8410, Руководство пользователя

Результаты поиска

Содержание 8410

Отзывы:

Похожие инструкции для 8410

Бренды по названию

Популярные бренды