HearthStone 8410 Скачать руководство пользователя страница 49

Страница: 49 / 56

Hearthstone Quality Home Heating Products, Inc ®

WFP-75 Model 8410

3.4 ANGLED WALL RADIATION SHIELD

When passing through a combustible wall with the chimney at a 30

or 45

angle (30

in Canada and 30

only in the USA), an angled firestop or wall radiation shield provided

by the chimney manufacturer must be installed. Only one is required. Follow the

chimney manufacturer’s installation instructions.

In cold climate locations, it is recommended that you use the insulated wall radiation shield

since it will maintain the home’s thermal barrier.

Figure 49

3.5 CHIMNEY SUPPORT INSTALLATION

Universal Roof Support

This support has three possible uses:

It must be used on a roof to support the chimney.

It may be used on a floor, ceiling or roof above an offset to support the chimney

above the offset.

It may be used on a floor, ceiling or roof as a supplementary support.

For roof support installation, refer to the instructions provided with the support by the

chimney manufacturer. Many manufacturers will provide the maximum height of chimney

that can be supported by the support. Make sure you respect those parameters.

Universal Offset Support

This support is used to support the chimney above an offset. When the chimney offset is

used to pass through a wall, this support may be used on the wall to support the chimney.

For offset support installation, refer to the instructions provided with the support by the

chimney manufacturer. Many manufacturers will provide the maximum height of chimney

that can be supported by the support. Make sure you respect those parameters.

Содержание 8410

























































Результаты поиска

Содержание 8410

Отзывы:

Похожие инструкции для 8410

Бренды по названию

Популярные бренды

HearthStone 8410, Руководство пользователя

Результаты поиска

Содержание 8410

Отзывы:

Похожие инструкции для 8410

Бренды по названию

Популярные бренды