ECO CHOICE PELLET STOVE SERVICE MANUAL
POWER SUPPLY TROUBLE-SHOOTING
1) CHECK FOR POWER AT THE BLACK WIRE FROM THE POWER CORD. (SEE FIG. 1)
A. IF NO POWER------CHECK OUTLET OR REPLACE POWER CORD
B. IF POWER IS PRESENT, CONTINUE TO STEP 2
2) CHECK FOR POWER AT THE GREY WIRE ON THE 7 AMP FUSE HOLDER. (SEE FIG. 2)
A. IF NO POWER------REPLACE THE FUSE OR THE FUSE HOLDER
B. IF POWER IS PRESENT, CONTINUE TO STEP 3
3) CHECK FOR POWER AT THE GREY WIRES ON SNAP DISC #3. (SEE FIG. 3)
A. IF NO POWER------RESET THE SNAP DISC OR REPLACE IT
B. IF POWER IS PRESENT---CHECK FOR CONTINUITY AT PIN 5 (WHITE WIRE) TO POWER CORD
(FIG.4 & 5) OR REPLACE THE CONTROL BOX
PAGE 14
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Unplug cord before doing any checks or
repairs.
• Do NOT touch wires while unit is plugged in.
CAUTION