ECO CHOICE PELLET STOVE SERVICE MANUAL
IGNITER TROUBLE-SHOOTING
1) TURN ON THE THERMOSTAT CIRCUIT AND MAKE SURE THE CALL LIGHT IS ON
B. IF POWER IS PRESENT-----REPLACE THE IGNITER
A. IF NO POWER------CHECK THE WIRE HARNESS OR REPLACE THE CONTROL BOX
2) CHECK FOR POWER AT THE IGNITER:
PAGE 11
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Unplug cord before doing any checks or repairs.
• Do NOT touch wires while unit is plugged in.
CAUTION
