Healthrider H70e Elliptical, Руководство пользователя

Страница: 5 / 24

5
M10 Split
Washer (73)–4
M8 Split
Washer (85)–4
M4 x 16mm
Screw (72)–8
5/16" Washer
(68)–2
M8 x 20mm Patch
Screw (86)–2
M8 x 44mm Patch
Screw (84)–8
M8 x 56mm Patch
Screw (83)–4
M10 x 20mm Patch
Screw (70)–4
M8 x 56mm Bolt
Set (65)–2
5/8" Wave
Washer (31)–2
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.