Health O Meter 2400KL, Инструкция пользователя

Страница: 19 / 24

19
QUICK START / OPERATING INSTRUCTIONS (CONT)
9. With no weight on the scale, the tare value will remain on the display until changed, cleared,
or until the scale is turned off.
10. To remove the Tare, press the TARE button again. The word “TARE” will disappear from the
display and the tare value will be cleared from the display. The scale will resume normal
operation.
Weighing a Patient
Note: When this scale is turned on, it will always default to the settings and units last used (lb or
kg).
1. Make sure there is no object on the scale assembly.
2. Press the ON/OFF button to turn the scale on.
3. Wait until the “0.0LB” or “0.0KG” appears on the display.
4. Tare out the weight of the wheelchair, and roll the patient in the wheelchair onto the scale.
The scale will begin to display weight information and will lock on the patient’s weight when the
stable weight of the patient is determined. Depending on the movement of the patient on the
scale, it may take several seconds for the scale to lock onto the weight.
Caution: To prevent patient injury, the patient must be attended throughout the entire
weighing event. Exercise caution when rolling patient onto and off of the scale.
5. Once a weight has been displayed, while the patient is still on the scale, Health o meter
recommends performing a second weighing by pressing the
REWEIGH button.
6. The weight may be held on the display by pressing the HOLD/RELEASE button. To release,
press the HOLD/RELEASE button again.
7. After the weight measurement has been taken and is recorded, roll the patient off the scale.
8. Press the ON/OFF button to turn the scale off.
Weight Recall
The last weight reading on the scale can be recalled by pressing the RECALL button. To clear
the display of the recalled weight, press the ENTER button.
Note: Clearing the recalled weight from the display will not clear the recalled weight from
memory. The recalled weight will remain in memory until another weight is obtained.