Health O Meter 2400KL, Инструкция пользователя

Страница: 13 / 24

13
DISPLAY ASSEMBLY WALL MOUNT INSTRUCTIONS
Display Assembly Wall Mounting Instructions
Caution: When wall mounting the display assembly, ensure that the
mounting location is free of electrical lines, gas pipes, and other safety
hazards. Ensure that wall is of construction that can support the display
assembly.
1. Position the display assembly on the wall, and carefully trace around the display outline.
2. Mark a level horizontal line, 2-¾” (70mm) below the top of the display outline.
3. Mark a vertical line through the center of the display outline. The center line is 4-½” (114mm)
from each side of the display outline.
4. On the level horizontal line, mark two drill holes 2-¼” (57mm) away from the center line.
5. Use the appropriate plastic or metal anchors for the type of wall construction and carefully
drill the appropriate sized holes.
6. Insert the anchors into the wall and screw in the two mounting screws into the anchors.
Adjust the screw head depth such that the bracket can be mounted over the two screw heads.
7. Position the display assembly mounting holes onto the mounting screws and pull down on the
display assembly to secure the bracket over the screws.
Required Parts
(1) Display Assembly
(2) #8 Anchoring Screws (4.2mm nominal OD)
(2) Mounting Anchors, Compatible with Wall Construction
Note: Anchors and Anchoring Screws are not included with this scale.