
36
English
10.5 Enter Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for date/time and network.
Once this has finished, the system is ready to use in most modes.
1. To run the setup wizard again, press
MENU
→
Main menu
→
System settings
→
Setup wizard
→
Yes.
2. Press
SELECT
to confirm
‘Yes’,
then step by step to set it.
For Power on condition:
Note:
Here, high brightness level can make it easy to view the station information.
1. Press
DIMMER
directly to enter backlight level setting mode, when the cursor is pointing to
‘Power-On Level’,
press
SELECT
to confirm.
2. Turn
SELECT
to cycle through options:
Low/Medium/High.
3. Press
SELECT
to confirm your preferred level to clearly view your radio information, setting to the high level is
recommended for power on condition.
For Standby condition:
The setting principle above is suitable for standby condition as well, setting to a low level is recommended if you feel
comfortable and you do not want the light bothering you.
10.6 Dimmer