
11
English
Slicer
Chapter 2 - Internet Radio Mode
2.1 Turning on
1. Connect to your Internet Radio adapter and ensure the power LED lights up, extend antenna.
2. Press the button to switch on your radio, for initial use, a welcome message will be given by
your radio and then you will be asked if you want to start ‘Setup wizard’.
2.2 Setup Wizard
1. Continue above step, press
SELECT
to confirm
‘YES’
and then turn
SELECT
to your preferred
‘hour format’,
press to confirm.
2. Press
SELECT
to confirm
‘Update from Network’,
and then follow your radio’s instructions and
configure the following parameters:
P
Time zone:
select your local time zone.
P
Daylight savings:
On or Off
P
Wlan region:
Most of Europe/USA/Canada/Spain etc.
P
SSID:
In some cases, your radio may find more than one network. Turn SELECT to your
favorite one, press to confirm.
Note:
If your network is not configured to request a password (WEP/WPA), the radio will connect to
this network and display the picture shown on the left.