25
English
Slicer
5.1 General Operation
1. Press
MODE
repeatedly until
< FM Radio >
is displayed.
For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last FM station listened to will be selected.
Note: or enter < Main menu >, and then turn SELECT to < FM >, press SELECT to confirm.
5.2 Scan Setting
P
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
P
To change the scan settings so that they stop only at stations with good signal strength, press
MENU
→
< Scan setting >
→
Strong stations only?
→
Yes,
press
SELECT
to confirm.
5.3 How to Scan
1.
To manually adjust frequency
, when the frequency shows up, press and hold
MENU
until it
says ‘Turn to turn’, and then turn
SELECT
to adjust it by 0.05MHz per step, or while the frequency is
displayed, press
up/down
on the remote control to adjust manually.
2. For auto-searching, when the frequency is displayed, simply press SELECT, or SCAN.
Chapter 5 - FM Mode
