
33
English
Slicer
Chapter 10 - System settings
To check the alarm status, press to enter standby mode.
• Turn Alarm off
When the alarm sounds, press to turn it off, or
• Play Snooze Function
Press
SNOOZE
to postpone it, repeatedly press
SNOOZE
, the
SNOOZE
can be 5/10/15/30 minutes in turn.
Note:
a. While in
SNOOZE
function, the relative alarm should be blinking, and shows how long it will last, during this time, you
also can press to stop snooze, and press again to have your radio play.
b. After reached the
SNOOZE
time, it should sound again.
• To cancel the Alarm
Refer to steps1-3 above, set
‘Alarm Enable status’
to
‘Off’,
and then follow your radio’s instructions, until it says ‘
Alarm saved’.
10.1 Equaliser
Note:
when you want to adjust timbre, this order will help you to achieve it! Several preset EQ modes are available as well as a user-
defined setting.
1. These settings can be reached by pressing
MENU
to
< Main menu >
→
< System settings >
→
< Equaliser >
, press
SELECT
to
confirm.
2. You can then choose from a variety of preset modes or create your own through
My EQ profile setup
, then follow your radio’s
demonstration to adjust relative bass, treble and loudness settings.