HD DVB-S2, Руководство пользователя

Страница: 16 / 28

16
Red key to switch between capital/small letter
Green key to delete input character
Yellow key to save the edition and close the
window
Blue key to cancel adition operation and exit from
the window
User can delete the satellite from the satellite list by
pressing the yellow key in Transponder List menu.
Press UP/DOWN to move highlight to choose the
satellite and then press Blue color key to delete the chose
satellite.
After user press the Blue key, there will show a
dialogue asking “Are you sure to delete?”. User can choose
YES or No according to their needs.
2.3. Antenna Setup
When enter into “Antenna Setup” menu, the system
will show a menu as below.
1 . Satellite: press Left/Right to choose satellites or
press OK and enter into satellite list then press UP/DOWN to
choose the satellite directly.
2 . LNB Freq: press Left/Right to choose parameter or
press OK and enter into the parameter list to choose directly.
Options: 5150/ 5750/ 5950/ 9750/ 10000/ 10050/ 10450
/ 10600/ 10700/ 10750/ 11250/ 11300/ 5150-5750 /5750-5150/
Universal (9750-10550)/ Universal (9750-10600)/ Universal
(9750-10700)/ Universal (9750-10750).
3 . Transponder: press Left/Right to choose the TP or
press OK to enterinto TP list to choose directly.
4 . Position No.$Save: press Left/Right to choose.
5 . DiSEqC1.0: press Left/Right to choose
Option: Disable/ Port 1/2/3/4
6 . DiSEqC1.1: press Left/Right to choose
Option: Disable/ 1 Cascade M1 Port 1,2,3,4/ 1
Cascade M2 Port 1,2,3,4/1 Cascade M3 Port 1,2,3,4/2
Cascade Port 1,2,3,4.5….16.
7 . 22K: press Left/Right to switch ON/OFF.
8 . Motor Type: press Left/Right to choose
Option: OFF/ DiSEqC1.2/ USALS.
When the Motor Type set as DiSEqC1.2/ USALS,
then user can do the Motor Setting. Press OK on “Motor
setting” there will show a new window as the below picture
shows.
Position Setting
Press OK on “Position Setting” can enter into it’s
setting window as below.
User can set the Satellite, Transponder, Position
NO.& Save…in this window by press Left/Right.
Press OK on “Go to X” can enter into the choice list.
User can set accrording to their needs. After user finished this
setting there will show a dialogue “Want to move the position”.
User can choose “Stop” to stop move or EXIT to exit from the
dialogue.
If the position is properly set, there will show a
dialogue “Are you sure to change this satellite’s Position?
when user press OK on “Save”. But if the position is not
preperly set, there will show a dialogue “Position not specified
(1-63)”. User need to reset the position and then save the
setting.
Press OK on “Recalculation”, there will show a
dialogue “Are you sure re-calculate all satellite positions?”.
User can choose YES or NO according to their needs.