
H B X Z O N - 0 5 0 0 Z o n e C o n t r o l
V e r s i o n 2 . 2 0
Zone-0500 Manual Page 6
DIP SWITCHES
The ZON-0500 has two sets of dip switches that allow the user to better match the output of the control with the
installation. The dip switch settings have different functions, depending on if the ZON-0500 is used as an expan-
sion module with an ECO-1000, a CPU-1000, or as a standalone zone control.
Dip switches 1-4 on the left set of dip switches are used for setting up zone priorities and zone post purge time.
Dip switches 2-5 on the right set of dip switches correspond to zones 1-4, and dipswitch 1 is used to modify the
type of demand signal sent to the main controller when used as an expansion module with the HBX CPU-1000.
The left Dip Switches are used for setting up zone
priorities and the zone device (pump or Valve) the
control will use.
The right Dip Switches are used for setting up DHW
priority and heat demands, heating or cooling
demands and high temp or low temp demands.
LEFT DIP SWITCHS
RIGHT DIP SWITCHS
on
on
Left Dip switches
Right Dip switches
on
OFF
Position
ON
Position
Dip switches 2-5 can be set in any combina
-
tion for a mixture of different zone demands.