H B X Z O N - 0 5 0 0 Z o n e C o n t r o l
V e r s i o n 2 . 2 0
Zone-0500 Manual Page 9
RIGHT DIP SWITCH SETUP
CPU-1000
STAGING MODE
MIXING MODE
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling
The right Dip Switches are used for setting up DHW priority and heat demands
Dip Switch 1: Domestic Hot Water (DHW) Priority
Dip Switch 2-5: Heat Demand Zone
Dip Switch 2-5: Low/High Temperature Zone
OFF:
No DHW priority
ON:
This Dip Switch allows the zone controls to receive a DHW priority from the CPU-1000. If DHW is on the CPU-
1000 it will shut off all the zones on the ZON-0500’s.
The dip switches must be set to
OFF
position for this configuration.
NOTE: all heating zones will shut down when the control is in WWSD.
OFF:
Low Temperature Demand Zone. This dip switch set up allows the user to program Low Temperature Zones.
ON:
High Temperature Demand Zone. This dip switch set up allows the user to program High Temperature Zones.
NOTE: all heating zones will shut down when the control is in WWSD.