H B X Z O N - 0 5 0 0 Z o n e C o n t r o l
V e r s i o n 2 . 2 0
Zone-0500 Manual Page 8
RIGHT DIP SWITCH SETUP
STAND ALONE UNIT
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling
The right Dip Switches are used for setting up DHW priority and heat demands
Dip Switch 1: Domestic Hot Water (DHW) Priority
OFF:
No DHW priority
ON:
DHW Priority. This dip switch position allows the user to set up a temporary DHW priority on zone 1 over the
rest of the zones. The priority time will be 60 minutes, or until the DHW demand is satisfied. When using more than
one ZON-0500, use the first dip switch on the first zone module connected. This setting will give onboard DHW
priority over the ZON-0500 modules.
Dip Switch 2-5: Use As Heating OR Cooling Demands (Use this configuration with ECO units)
Dip Switch 2-5: Use As Low Temp OR High Temp Demands (Use this configuration with CPU units)
OFF:
This position will allow the user to set up each zone for heating. This dip switch position will turn on demand
output 3 and 4 (DHW/HD)
ON:
This position will allow the user to set up each zone for cooling. This dip switch position will turn on demand
output 1 and 2 (TT/CD)
OFF:
This position will allow the user to set up each zone for high temperature demand. This dip switch position
will turn on demand output 3 and 4 (DHW/HD)
ON:
This position will allow the user to set up each zone for low temperature demand. This dip switch position will
turn on demand output 1 and 2 (TT/CD)
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling
on
on
on
on
on
on
on
on
on
Heating &
Cooling
OR
Heating
Only
Heating
OR
Cooling