HBX ECO-0550 Скачать руководство пользователя страница 27

H B X   E C O - 0 5 5 0   G e o t h e r m a l   C o n t r o l

V e r s i o n   2 . 0 0

© HBX Control Systems Inc. 2018

Page 25

Limited Warranty

HBX Controls warrants each of its products to be free from defects in workmanship and materials under normal use and 

service for a period of 24 months from date of manufacture or 12 months from date of purchase from an HBX Authorized 

Dealer, if within the above documented period after date of manufacture.
If the product proves to be defective within the applicable warranty period, HBX on its sole discretion will repair or replace 

said product.  Replacement product may be new or refurbished of equivalent or better specifications, relative to the 

defective product.  Replacement product need not be of identical design or model.  Any repair or replacement product 

pursuant to this warranty shall be warranted for not less than 90 days from date of such repair, irrespective of any earlier 

expiration of original warranty period.  When HBX provides replacement, the defective product becomes the property of 

HBX Controls. 

Warranty Service, within the applicable warranty period, may be obtained by contacting your nearest HBX Controls office 

via the original Authorized Agent and requesting a Return Material Authorization Number (RMA #).  Proof of purchase in the 

form a dated invoice/receipt must be provided to expedite the issuance of a Factory RMA.
After an RMA number has been issued, the defective product must be packaged securely in the original or other suitable 

shipping package to ensure that it will not be damaged in transit.  The RMA number must be visible on the outside of the 

package and a copy included inside the package.  The package must be mailed or otherwise shipped back to HBX with all 

costs of mailing/shipping/insurance prepaid by the warranty claimant.
Any package/s returned to HBX without an approved and visible RMA number will be rejected and shipped back to 

purchaser at purchaser’s expense.  HBX reserves the right, if deemed necessary, to charge a reasonable levy for costs 

incurred, additional to mailing or shipping costs.

Limitation of Warranties

If the HBX product does not operate as warranted above the purchasers sole remedy shall be, at HBX’s option, repair 

or replacement.  The foregoing warranties and remedies are exclusive and in lieu of all other warranties, expressed or 

implied, either in fact or by operation of law, statutory or otherwise, including warranties of merchantability and fitness for 

a particular purpose/application.  HBX neither assumes nor authorizes any other person to assume for it any other liability in 

connection with the sale, installation maintenance or use of HBX Controls products.
HBX shall not be liable under this warranty; if its testing and examination discloses that the alleged defect in the 

product does not exist or was caused by the purchasers or third persons misuse, neglect, improper installation or testing, 

unauthorized attempts to repair or any other cause beyond the range of intended use, or by accident, fire, lightning or 

other hazard.

Limitation of Liability

In no event will HBX be liable for any damages, including loss of data, loss of profits, costs of cover or other incidental, 

consequential or indirect damages arising out of the installation, maintenance, commissioning, performance, failure or 

interruption of an HBX product, however caused and on any theory of liability.  This limitation will apply even if HBX has been 

advised of the possibility of such damage.

Local Law

This limited warranty statement gives the purchaser specific legal rights.  The purchaser may also have other rights which 

vary from state to state in the United States, from Province to Province in Canada and from Country to Country elsewhere in 

the world.

To the extent this Limited Warranty Statement is inconsistent with local law, this statement shall be deemed modified to be 

consistent with such local law.  Under such local law, certain disclaimers and limitations of this statement may not apply 

to the purchaser.  For example, some states in the United States, as well as some governments outside the United States 

(including Canadian Provinces), may:
Preclude the disclaimers and limitations in this statement from limiting the statutory rights of a consumer (e.g. United 

Kingdom);
Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or 
Grant the purchaser additional warranty rights which the manufacturer cannot disclaim, or not allow limitations on the 

duration of implied warranties.

Содержание ECO-0550





























Отзывы: