HBS CPW 0604 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 180

HBS CPW 0604 Скачать руководство пользователя страница 11

CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)

11

1

General

Persons addressed by this operating manual

This operating manual is written for operators, personnel of the end user, and authorized
service technicians. It provides you with all necessary information to operate the power
unit.

Required user qualification

The power unit must only be operated by qualified personnel

.

Let the CNC Production Welder only be operated by persons who

– are qualified through a suitable training according to the current standards (see

appendix),

– are properly instructed,

– are physically and intellectually suitable,

– can be expected to reliably fulfill the requested job.

What else must the owner observe?

Make sure that this operating manual is always in reach of the stud welding unit.

Read the entire manual before operating the CNC Production Welder.

Strictly observe the safety instructions.

Before starting up the power unit, let the operator sign the confirmation that he/
she has read and fully understood the operating manual (see appendix).

Do not commence stud welding until you have understood all operating
processes.

Contact us if there are any doubts on certain operating procedures.

Protect the power unit against unauthorized use.

Inform our service in case of malfunction.

Based on this operating manual, a company specific work order, as well as a company
specific maintenance instruction must be drawn up. The company specific work order
must consider the special user conditions in your company.

Make sure that operators of the welder are provided with and wear personal protective
equipment, e.g. protective goggles, gloves, shoes, ear protection etc.

Owners and operators make sure that the CNC Production Welder is only used as
directed.

During any activity such as transportation, set-up, (re-)assembly, production,
maintenance etc. observe the information given in this operating manual.

1 General

«
...
9
10
11
12
13
...
»

Содержание CPW 0604





















































































































































































Отзывы:

Нет отзывов