HBS CPW 0604, Руководство по эксплуатации, Страница: 108 / 180

108 CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)
Description of Parameters
NOMINATION UNIT P LEVEL DESCRIPTION
Operating mode X INT from 2
1 = Linear axis
2 = Rotary table
Software limit X REAL from 2
Path from motor initiali work piece offset X + work
piece size X + path (smaller) to limit switch X
± Signal
Corrective factor X (1) REAL from 2
Spindle corrective factor in motor increments
Addition -1 / +1 to one motor revolution (16384 Inc)
Software limit X (Grad) REAL from 2
Path from motor initiali max turning angle
(max = 360°)
Corrective factor X (2) REAL from 2
Spindle corrective factor in motor increments
Addition -1 / +1 to one motor revolution (16384 Inc)
Gear X [Z2:Z1] REAL from 2
Operating mode X = 2
Gear ratio between motor and round table
Speed manual INT 1
Max. speed in operating mode 1 (manual)
Min speed resulting : Max : 3
Speed Automatic INT 1 Max speed in operating mode Automatic
Settings.P_win INT
Stoppage window:
admissible rule offset (0..32767) : [Inc]
Settings.P_winTime INT Stoppage window : Time (0..32767) : [ms]
Control.KPn INT Speed controller P factor (1..3,2767) [ms] : [A/(1/min)]
Control.TNn INT Speed controller post-set time (1..327,67) [ms]
Control.KPp INT Position control P factor (0..125) : [1/s]
Control.KFPp INT Speed presetting control position control (0..32767) : [ ]
Control.pscDelay INT
Posicast filter for speed controller
Delay (0..32) : [ms]
Motion.acc INT Acceleration (0..250000) : [(1/min)/sec]
A complete restart of the machine is a must after changes to
motor/axis parameters.
This is necessary to sustainably store the motor parameters in
the EEPROM of the axes drives.
4 Function
4.10 Menu PARAMETER CNC