HBS 92-20-256 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 62

HBS 92-20-256 Скачать руководство пользователя страница 38

38

C 08 Order No. BA 92-20-256 Issue 01.03.08

7.2

Regular Maintenance Operations

Any maintenance and repair operation should only be carried

out by qualiﬁed personnel or by your competent service

technician.

You muﬆ only carry out the following service operations.

Before ﬆarting welding, check welding cable and control cable for faults and

damage.

Threat to life!

Never work with damaged cables. Use of damaged cables

means risking an electrical shock.

Before you ﬆart any cleaning and maintenance operation

with welding gun, switch oﬀ the connected power unit and

disconnect control cable and welding cable from power unit.

Clean the surface of the welding gun of dirt and duﬆ.

Do not use any solvent containing cleaning agents.

Solvent containing cleaning agents may damage the plaﬆic

components of the welding gun.

Check the chuck from time to time. If you disclose scorching areas on the

chuck, replace the chuck (see chapter 4 and 5).
Before you ﬆart working, check the bellows at the front end of the welding gun

for possible damage and if properly inﬆalled.

Never work with damaged or improperly inﬆalled bellows.

This may signiﬁcantly aﬀect life expectancy of your welding

gun.

There are some markings (type and adjuﬆment guides) placed at the welding gun.

Take care that markings remain clearly visible.
Replace illegible or damaged markings.

«
...
36
37
38
39
40
...
»

Содержание 92-20-256































































Отзывы:

Нет отзывов