HBS 92-20-256 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 62

HBS 92-20-256 Скачать руководство пользователя страница 3

iii

C 08 Order No. BA 92-20-256 Issue 01.03.08

iii

Dear cuﬆomer,
Thank you very much for purchasing a welding gun from HBS Bolzenschweiss-

Syﬆeme.
We from HBS wish you always successful working with this ﬆud welding unit.
We ask you to observe the following points:
– Store the operating manual in a way that it can always be accessed by the

operator.

– Let the operator sign before ﬆarting up that he has read and completely under-

ﬆood the operating manual.

– This operating manual applies only to this ﬆud welding unit.
– Protect the ﬆud welding unit from unauthorized use.
– The ﬆud welding unit muﬆ only be operated by trained personnel.
– Let an electrician check whether the wall sockets where you want to connect the

related ﬆud welding unit, are properly fused and grounded.

– Inform our cuﬆomer service in case of malfunction.
– In case of accident, inform a physician and the responsible oﬃcial body.

THREAT TO LIFE!

Persons ﬁtted with a pace maker muﬆ not operate the ﬆud

welding machine.

MAGNETIC FIELDS!

During ﬆud welding, ﬆrong electro-magnetic ﬁelds are

generated. Do not weld in the vicinity of the electrical

equipment which could be aﬀected.

Safety inﬆructions are a delicate subject. Anybody who handles a ﬆud welding

unit, whether it is the welding gun or the power unit, should be familiar with them,

because improper use of ﬆud welding units can be dangerous to life.
For your own sake you should know the safety inﬆructions for operating your HBS

ﬆud welding units inside out.
In addition to the protection of your health and the capital value of the enterprise, the

safety inﬆructions are intended to clarify any responsibilities, which arise from

ownership and operation of the equipment.
This chapter of the operating manual oﬀers you clear and easy to underﬆand information

for the safe operation of your HBS ﬆud welding unit.

«
1
2
3
4
5
...
»

Содержание 92-20-256































































Отзывы:

Нет отзывов