HBS 92-20-256 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 62

HBS 92-20-256 Скачать руководство пользователя страница 16

16

C 08 Order No. BA 92-20-256 Issue 01.03.08

Plug the control cable of the welding gun into the appropriate connection of the

power unit.

Twiﬆ the retaining nut of the control cable connector clockwise to secure the

connection.

The welding gun cables muﬆ not be coiled during welding.

Coiled cables work as a coil and may negatively aﬀect the

welding result. Before welding, lay out the cables

lengthwise.

Fix the cables. Strong magnetic ﬁelds occur during welding which may cause a

movement of the cables. This may cause a slackness of the connections.

3.3

Ground Connection

Plug the ground cable in the connector of the power unit.

Press in the plug and twiﬆ ﬁrmly clockwise.

The connection is not secured againﬆ working itself loose!

Check the plug connections regularly to ensure that they are

properly locked. In case of loose connection, heat may build

up in the plug and may deﬆroy the entire plug connection.

Remove any ruﬆ, paint, or contaminants from the workpiece in the areas where

you intend to connect the ground cables.

«
...
14
15
16
17
18
...
»

Содержание 92-20-256































































Отзывы:

Нет отзывов