16
^
hazet.com
•
]
• Only use clean and dry air at a max. pres-
sure of 90 PSI or 6.3 bar. Dust, flammable
vapour and high humidity can result in
damage to the pneumatic tool's motor.
• The HAZET soda spray gun is user-friendly
and easy to use – the soda jet is steplessly
regulated via the trigger. The plastic handle
does not become cool during use, but
rather remains soft and pleasant and lies
perfectly in the hand.
4. Maintenance and cleaning
• For tool cleaning or cleaning of its compon-
ents we recommend using white spirit.
• Never clean with solvents or acids, esters
(organic compounds comprising acids
and alcohol), acetone (ketone), chlorinated
hydrocarbons or oils containing nitro hydro-
carbons. Do not use any chemicals with a
low burning point.
• For customer service, please contact your
HAZET distributor.
5. Malfunctions
If malfunctions occur, check the following:
• Compression system and compressed air
supply line,
air consumption l/min and hose
diameter according to the technical data of
the tool
• Check the compressed air for the occurrence
of dust, condensate and rust particles
• Excess lubrication of the air motor
2. Before starting the operation
The pneumatic tools must
always be used, inspected and
maintained in compliance with
the local government, state or
federal regulations.
• Drain the compressor tank and remove the
condensate from the air lines. Carefully read
through the operating instructions for the
compressor.
IMPORTANT:
We recommend using air filters.
• Lubricate the tool;
see the section on main
tenance
in these operating instructions.
• Remove the dust cap on the compressed air
inlet.
• Connect the tool to a hose of suitable
size.
Table on page 15.
3. Commissioning
• Switch on the compressor so that the air
tank can be filled.
• Turn the compressor regulator to approx.
90 PSI or 6.3 bar. The max. working pressu-
re of this tool is approx. 90 PSI or 6.3 bar.
• Do not use damaged or worn air hoses or
adapters of inferior quality.
• The technical data provided refers to opera-
tion of the tool at a pressure of 6.3 bar.
• Caution is required at all times when using
the soda spray gun.
• Press the operating lever to operate the tool.
• Release the operating lever to stop the tool.
• After completing the operation, switch off
the compressor and store it in accordance
with the operating instructions of the com-
pressor.
3
Design and function
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
