12
^
hazet.com
•
]
2. Intended use
Operational reliability is only guaran-
teed if the tool is used as intended in
accordance with the information in the ope-
rating instructions. In addition to the safety
advice in these operating instructions, the
general safety regulations, regulations for the
prevention of accidents and regulations for
environmental protection valid for this tool's
application range must be observed and
respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
• The HAZET soda spray gun is equipped
with a refillable container (1.2 l) and is suita-
ble for both hobby and professional use. It
is used with a special soda, which is parti-
cularly conceived for blasting.
• Soda blasting is a fast and gentle method of
removing paint and rust – even from poorly
accessible places. The mineral jets neither
heat the metal nor deform it. Soda jets do
not cause damage to either glass, rubber or
plastic. At the same time, this means less
masking work. Unlike sand blasting, soda
blasting immediately protects bare metal
from corrosion.
• Soda blasting removes dirt-repelling coa-
tings from boats without damaging the
structure of the vessel, and removes paint
without attacking plastic and rubber seals.
• Paint can be removed from glass surfaces
and window frames with the soda jet wit-
hout causing damage to glass or seals. It
removes paint from wooden furniture, and
is gentle and environmentally friendly.
• Always use P2 respiratory protection, ear
defenders and eye protection as well as a
face mask when performing soda blasting
tasks. The soda powder is pure NaHCO3,
i.e. sodium bicarbonate. It is not dangerous,
but it can be harmful to health if the dust is
inhaled.
• Any incorrect use of the HAZET soda
spray gun or use that fails to com-
ply
with
the
safety
instructions
can result in serious injury or even death.
• Any deviation from the intended use
and/or any misapplication of the tools
is not permitted and will be considered
as improper use.
1. Owner's
liability
• The tool was developed and manufactured
according to the technical norms and stan-
dards valid and recognised at the time and
is considered to be operationally reliable.
Nevertheless, the device may present a
danger when it is used in an incorrect or
inappropriate way or by non-qualified per-
sonnel. Please make sure that any person
using this tool or carrying out maintenance
work carefully reads and fully understands
these operating instructions before using
the tool.
• Any modification of the tool is strictly for-
bidden.
• All safety, warning and operating instruc-
tions on the device must be kept legible
at all times. All damaged labels or stickers
must be replaced immediately.
• All specified set values or ranges must be
observed.
• Always keep the operating instructions
close to the device.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regular-
ly.
2
For your safety
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
