HazeBase classic 2, Инструкция по эксплуатации

Страница: 8 / 25

Classic² / Highpower²
4.4 Interchangeable nozzle (Highpower² only)
The Highpower² has an interchangeable nozzle system.
ATTENTION! Please change the nozzle only when the heating element is cold, danger
of burns!
To do this, unscrew the nozzle from the front using a 14 mm nut with extension and
ratchet. Make sure that the copper sealing ring is still on the nozzle adapter. Now
screw the new nozzle onto the nozzle adapter. The nozzle should be screwed on
tightly without overtightening the thread. If leaks occur at the copper sealing ring,
tighten the nozzle again. If necessary, replace the sealing ring if it is worn.
7