HazeBase classic 2, Инструкция по эксплуатации

Страница: 14 / 25

Classic² / Highpower²
To exit the submenu, the menu item "exit" must be selected and confirmed with the
confirmation key.
6.7 Operation via the internal timer
To set and activate the internal
timer, you must first switch to
the Timer submenu.
Here, too, the menu fields are
changed accordingly. At the top
left, the pump value used in
timer mode can now be set.
Bottom left
the waiting time can be set in 0.1 minute ( 6 sec.) steps. Analogously, the fogging
time can be set in steps of seconds at the bottom right.
To activate the timer, the confirmation key can be pressed for both the waiting time
or the fogging time. This activates or deactivates the timer. Depending on the
selected menu item, the timer starts with the waiting time or the fog time.
The pump value can still be changed even when the timer is activated.
If the "Timer" submenu is exited again, the timer is also deactivated again.
7 "Options" menu item
In the submenu "Options" the pump characteristics can be set, as well as the protocol
of the XLR sockets can be selected.
13