background image

Classic² / Highpower²

11. Warranty conditions

For the purchased fog machine Classic²/Highpower² hazebase provides warranty
according to the following conditions:

1.

We shall remedy free of charge in accordance with the following conditions (Nos.
2 to 6) damage or defects to the device which are demonstrably due to factory
defects if they are reported to us immediately upon discovery and within 24
months of delivery to the end user. A warranty obligation is not triggered by
minor deviations from the nominal condition which are insignificant for the value
and usability of the device, by damage from the effects of water and generally
from abnormal environmental conditions or force majeure.

2.

Die Garantieleistung erfolgt in der Weise, dass mangelhafte Teile nach unserer
Wahl unentgeltlich instand gesetzt oder durch einwandfreie Teile ersetzt werden.
Geräte, für die unter Bezugnahme auf diese Garantie eine Garantieleistung
beansprucht wird, sind an uns zu übergeben und frei Haus einzusenden.
The proof of purchase with the date of purchase and/or delivery must be
presented. Replaced parts become our property.

3.

The warranty claim expires if repairs or interventions are carried out by persons
who are not authorized by us to do so or if our devices are equipped with
supplementary or accessory parts that are not matched to our devices.
Furthermore, the warranty claim expires if other than the original hazebase fog
fluid was used. If the devices are sent to us without prior removal or emptying
of the fluid canister, the warranty also expires, as well as in the case of
demonstrable disregard of the operating instructions or in the case of faults due
to improper handling/handling as well as in the case of damage due to the
effects of violence.

4.

We do not grant any performance claims for components or component groups
that are subject to natural wear or normal wear. In particular, all fluid-conveying
parts such as pumps and heating elements are considered to be wearing parts.
A goodwill settlement will be checked in each individual case.

5.

Warranty services do not cause an extension of the warranty period, nor do they
start a new warranty period. The warranty period for installed spare parts ends
with the warranty period for the entire device.

21

Содержание classic 2


























Отзывы: