Hayward Aqua Plus 16v PL-PLUS-16V Скачать руководство пользователя страница 12

Страница: 12 / 24

“Dual Equipment - Separate Heaters” for Pool/Spa configuration

These systems have 2 complete sets of equipment (filter pump, filter, heater)—1 set for the pool and the other set
for the spa. Refer to the diagram below:

Some important notes regarding the Aqua Plus 16v control of Dual Equipment Pool/Spa systems with separate
heaters:

In the Pool/Spa Config., select:

Pool/Spa Setup

Pool and Spa-Dual

Heaters

Htr1=Spa,Htr2=Pool

1. When dual equipment is selected:

a. The “Filter” pump automatically is renamed “Pool Filter” and can not be changed. The pool filter

can be a one, two or variable pump.

b. The “Aux1” output is automatically renamed “Spa Filter”, its function is set to “Timeclock” and the

Interlock feature is forced to “Disabled”. None of these can be changed. The spa filter can be a
one, two or variable pump.

c. The Heater1 output should be connected to the spa heater—the heater will only turn on when the

spa filter pump is running.

d. The Heater2 output should be connected to the pool heater—the heater will only operate when

the pool filter is running. If the system does not have a pool heater, disable Heater2 in the configuration
menu and then the relay can be used to operate general purpose Valve4.

2. The water sensor should be installed on the pool loop prior to the heater and will display the pool temperature

whenever the “Pool Filter” pump is running.

3. The dual equipment spa sensor should be installed on the spa loop prior to the heater and will display the

spa temperature whenever the “Spa Filter” pump is running.

Aux1 Pump Spd

Settings Menu

Select Settings Menu (default) or desired pump speed (Filter Lowest to Highest)
Move to previous/next configuration menu

if filter pump is set to variable speed

and the relay type is set to standard

Aux1 Config.

+ to view/change

Aux1 Function

Manual On/Off

Aux1 Group

Filter: Unaffected

Aux1 Group

Timer: None(Manual)

Aux1 Name

Cleaner

Aux1 Relay

Standard

Push to access Aux options

Options available depend on the function that is selected

Rotates between Manual On/Off (default),Countdown Timer and Timeclock

Rotates between all available names

Toggle between Standard (default), Dimmer, ColorLogic and VSP

Move to previous/next configuration menu

Move to previous/next menu item or next configuration menu

Move to next configuration menu item

Move to next menu item

Move to next menu item or previous/next configuration menu

Aux1 Interlock

Disable

Aux1 Freeze

Disable

Toggle between Enabled and Disabled (default) Aux1 Interlock

oggle between Enabled

and Disabled Aux1 Freeze

(default)

Move to next menu item

Move to previous/next configuration menu

for all functions except solar, dimmer relay,super chlorinate

low speed, group and pH dispense

for all functions except dimmer relay, super chlorinate
low speed, group and ph dispense

for group function only

for manual on/off, countdown
timer and timeclock functions

Move to next menu item

Rotates between

Manual On/Off (default), Countdown Timer, Low Speed- Filter,

Timeclock, Solar, Low Speed-Spa Filter, Group, Super Chlorinate, and pH Dispense

Aux1 Ext Input

Disabled

Toggle between Enabled and Disabled (default)
Move to previous/next configuration menu

WARNING: Do not use the Pro Logic to control an automatic pool cover. Swimmers

may become entrapped underneath the cover.

NOTE: If “Pool and Spa-Dual” is selected, Aux1 is dedicated to use as the spa filter. Its Name is set to Spa Filter, the Function

is set to Timeclock and Interlock is set to Disabled. These can’t be changed

Aux1 Name

The Pro Logic allows you to assign any one of a number of names (e.g. “Cleaner Pump, Waterfall,
Gazebo Light, etc.) to each of the aux outputs control function. This will make the Pro Logic much
more user friendly to the homeowner when they want to turn various aux equipment on or off or
program the timeclocks. A sheet of small name labels is included with the Pro Logic main unit and each
remote display/keypad so that the “Aux” pushbutton can be labeled the same as the name that you
have assigned. At this time it is also a good idea to make sure that the relay in the control box is also
labeled (hand written) with the same name as a help to technicians who may service this system at a
later date.

Aux1 Function

Manual On/Off (default)

—the aux relay will alternate between turning on and off when the aux button

is pressed. There is no automatic control logic.

Countdown Timer

– the aux relay will turn on when the AUX button is pressed and then will turn off

automatically after a programmed time (see Timers Menu in the Operations Manual). The AUX button
can also be used to turn the output off.

Low Speed of a 2-speed Filter Pump

– the Pro Logic will operate the aux relay whenever the low speed

operation of the filter pump is required. It is very important that the “2-speed” filter pump option be
selected under the “Filter Config.” Menu for proper operation.

FILTER

HEATER

BYPASS

VALVE

(manual)

HEATER

BYPASS

VALVE

(manual)

POOL SWEEP

BOOST PUMP

WATER