Aqua Connect: Training the Device
Step 2
Step 3
Press the Menu button on the ProLogic
system until the Settings Menu appears,
then press the left arrow button until
“Teach Wireless: + to start” appears.
Press the “+” button to initiate the
sequence on the controller and hold
down the teach button on the Aqua
Connect Home Network device.
Training will be complete when the
controller reports “Teach Wireless
Successful” If unsuccessful, reposition
and repeat the training process.
Page 18
Step 1
Use the following steps to train the Aqua Connect Home Network Device to the
control system. Make sure both units are powered up when conducting this step.
Note: If training the wireless device fails verify that the antenna is generation 2 (AQL2-BASE-RF).
A GLX-RF-EXTEND is available if the antenna needs to be moved closer to the Aqua Connect.
