2: Aqua Connect Not Functioning
Unit Not Communicating
Log in to the web account and check
the Pool Settings by clicking on the tab
Log in to the ACHN account and on the left side of the dashboard select the
“Pool Settings” tab. Scroll down until the Gateway MAC address appears as
well as the controller type; if this information does not appear go to step 2D,
if it does appear contact tech support (908)355-7995.
Step 2C
Check the main software revision in
the diagnostics menu.
Press the right arrow until main software rev.
appears. If the main software revision is 4.20 or
higher (1.20 AQR-PRO) then the problem is either
the network or possibly the Aqua Connect.
Press the menu button until Diagnostic Menu
appears.
Step 2D
Page 11