Hawking HDW2R1, Руководство пользователя

Страница: 117 / 122

117
d. Set your computer to obtain an IP address
automatically (DHCP), and see if your
computer can get an IP address.
e. If you did a firmware upgrade and this
happens, contact Hawking Tech Support.
f. Contact Hawking Tech Support for further help.
How do I reset the
HOW2R1 to factory
reset?
Run the software on the CD (or download it from
www.hawkingtech.com ). It should find the
HOW2R1 and allow you to initiate a factory reset
and reconfigure.
The software can
’t find
the HOW2R1
Make sure you are connected to the HOW2R1
either wirelessly or wired. Wired computers should
either be plugged into the LAN port on the PoE
injector or into a network switch that is plugged
into the LAN port. Wireless computers need to
be connected to the “Outdoor Repeater” network.
Disable any firewalls, internet security, etc
programs on the computer temporary. They can
block the software from detecting the HOW2R1
No connection to the
Internet
a. G
o to ‘Status’ -> ‘Internet Connection’ menu,
and check Internet connection status.
b. Attempt to connect to the source wireless
network to see if you can obtain an active
Internet connection directly. If network is out
of range do not try this.
c. Check your wireless security settings to ensure
they match with the source wireless network.
d. Source wireless connection does not have an
active Internet connection. Please check with
the source to troubleshoot.
e.
If you just can’t connect to one or more
websites, but you can still use other Internet
services, please check URL/Keyword filter.
f. Try to reset the Outdoor Wireless-N Smart
Repeater and try again later.
g. Check to see if the source wireless network
has DHCP enabled. If not ensure that you