42
2-6-1 LAN IP Section:
Here are descriptions of every setup item:
IP address (1):
Please input the IP address of this Outdoor Wireless-N
Smart Repeater. This is the IP address used to
access your Outdoor Wireless-N Smart Repeater.
Make sure to make note of the new IP Address after
you change it since the old one will no longer work.
Subnet Mask (2):
Please input subnet mask for this network.
802.1d
If you wish to activate 802.1d spanning tree
Spanning Tree (3):
function, select ‘Enabled’ for setup item ‘802.1d
Spanning Tree’, or set it to ‘Disabled’
DHCP Server (4):
If you want to activate DHCP server function of this
Outdoor Wireless-N Smart Repeater
, select ‘Enabled’,
or set it to
‘Disabled’.
If you select Disable, the IP
settings from your source Internet network will be
passed through to clients connecting through the
Outdoor Wireless-N Smart Repeater. (For example, a
network with a DHCP server IP range of 10.1.1.1
–
10.1.1.100 will disperse IP addresses within that range
to computers connecting through your Outdoor
Wireless-N Smart Repeater while the Outdoor
Wireless-N Smart Repeater is connected to that
specific network)
1
3
2
4
Содержание HDW2R1
Страница 1: ...1...
Страница 15: ...15...
Страница 17: ...17 the Outdoor Wireless N Smart Repeater before connecting...
Страница 112: ...112...