Hawk MiniWave Ultrasonic Level Series, Руководство пользователя

Страница: 8 / 16

Commissioning - Software
MiniWave User Manual
8
Advanced Settings
Parameter Description Options
Comms Adjust HART protocol settings.
Device ID
Default 1
BaudRate
1200
Blanking
Blanking is a dead-band / non measured range. The unit
cannot measure within this range.
Adjustable - recommended default
250mm (10")
Tracking
Adjust tracking response time for application. The faster
the tracking, the more responsive the measurement is,
but it is less smooth the output signal.
InstaTrack provides pulse by pulse live measurement.
Slow
Medium
Fast
InstaTrack
Mapping
Mapping creates a digital 'map' of false echoes
caused by problem mounting and structures. Select
'ExecuteMap' to set a mapped distance, conduct or
delete Mapping. Select 'MappedDist' to view a previously
mapped distance.
MappedDist
ExecuteMap Set Map Dist
EchoSize
The unit will target this echo size (measured in signal
voltage) during operation. High values can increase
stability but make the unit more susceptible to false
echoes. Lower values can make the unit less sensitive
and less likely to see false echoes.
0.4 - 2.49V
Default 0.59V
Analog
Adjust Analog output. Switch from 4-20mA to 20-4mA
and fine tune both 4mA current and 20mA current. 4-20mA
20-4mA Tune 4mA
Tune 20mA
Park 4mA
Park 8mA
Park 12mA
Sensitivity
Increase or decrease the unit Automatic Sensitivity
Control range.
0: Lowest
10: Default
20: Highest
WaveBoost
WaveBoost adds additional echo amplification on top
of the Automatic Sensitivity Control. WaveBoost should
only be used if maximum Sensitivity is not sufficient.
0: Lowest (default)
20: Maximum
Factry Reset Restore all parameters to factory default. Yes / No
Device Info Displays product type, serial number & software revision.
Lock Code
Enable / Disable lock code.
If enabled, select lock code number.
Enable /
Disable
Default
Disabled
1-200