Hawk MiniWave Ultrasonic Level Series, Руководство пользователя

Страница: 6 / 16

Installation
MiniWave User Manual
6
Powering The Unit
When power is applied, the unit will start up automatically. The LCD will scroll through its boot diagnostics and
display the serial numbers, software version and model types for the amplifier and transducer.
The selected Display Mode will be visible with a measurement.
The top right hand corner diagnostic indicates either the operating mode or the current output.
The unit will re-scan for the level whenever it is powered up.
185 mm (7.3”)
52mm
(2”)
72mm (2.8”)
47mm (1.85”)
2" BSP or
NPT THD
85mm (3.4”)
M20
Cable
Gland
M20 Blank Plug
+
-
23mm (0.9”)
+
-
CAL
RUN
Space
1.402m
17.2mA
m i n i w a v e
Space
1.402m
17.2mA
Set Lo Level
Set Hi Level
AutoSet
SCANNING
Set Lo Level
No
Yes
2.597m
Set Lo Level
185 mm (7.3”)
52mm
(2”)
72mm (2.8”)
47mm (1.85”)
2" BSP or
NPT THD
85mm (3.4”)
M20
Cable
Gland
M20 Blank Plug
+
-
23mm (0.9”)
Flip Lid
to access
terminals
+
-
CAL
RUN
Space
1.402m
17.2mA
M i n i W a v e
Space
1.402m
17.2mA
Set Lo Level
Set Hi Level
AutoSet
SCANNING
Set Lo Level
No
Yes
2.597m
Set Lo Level
Diagnostic
Display Mode
Interface
Button Action Navigation / Function
Press and release
Press and hold for 3 seconds
Access Main Menu
Select / Proceed
Access AutoSet Menu
Press and release Cancel / Return
Re-activate unit
Press and Release Scroll between live diagnostics
Scroll between menu options
Adjust parameters
Main Menu
Setup
Advanced
Autoset
Setup
Display Mode
Display Unit
Low Level
Hi Level
Damping
FailSafe
Advanced
Comms
Echo Size
Lock Code
Analogue
Language
Autoset
See (B) Autoset
Main Menu
Setup
Advanced
Autoset
Setup
Display Mode
Display Unit
Low Level
Hi Level
Damping
FailSafe
Advanced
Comms
Echo Size
Lock Code
Analogue
Language
Autoset
See (B) Autoset
Main Menu
Setup
Advanced
Autoset
Setup
Display Mode
Display Unit
Low Level
Hi Level
Damping
FailSafe
Advanced
Comms
Echo Size
Lock Code
Analogue
Language
Autoset
See (B) Autoset